|
Who's Online
There currently are 5849 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
The purchased manual is an scan of the original Panasonic paper-based Service Manual. Unfortunately the contrast is not perfect, but I am satisfied anyway!
;
The purchased manual is an high-quality scan of the original JVC paper-based Service Manual. The Service Manual includes the Owner´s Manual, so you do not have to buy both of them.
;
It paid to find this Service Manual, couldn't find it anywhere else. Exactly what I wanted. Received within 24 hours.
;
Complete manual with clear schematic diagrams and printed circuit board layouts of two variants of the headset and the transmitter an old and a new version.
Also shows how the headset and the transmitter is opened and how transmitter and receivers can be adjusted and where to measure.
I had no problems to repair the headset using this service manual.
;
Excellent printing quality. A complete and very useful manual with all details.
MODEL: WT-42313 / WT-42413
[Convergence Circuit] 16. Centering and Static Convergence
Measuring Instrument Test Point Ext. Trigger Measuring Range Input Signal Input Terminal -----------------NTSC -- Monoscope HD -- Monoscope Video & DTV Inputs
Purpose: Symptom:
To converge red, green and blue at the center of the screen Color edging over the entire picture.
Preliminary Degauss the shield cover and bracket unit of the CRT assembly and chassis. DO NOT degauss the CPM Assemblies. HD mode 1. Supply an HD Monoscope signal to the DTV Inputs. 2. Select the DTV Inputs as the signal source (Input button). 3. Enter the Convergence Coarse mode. 4. Set the data for the �HSTA� and �VSTA� items to: GREEN RED BLUE HSTA = 0 HSTA = 50 HSTA = -50 VSTA = 0 VSTA = 0 VSTA = 0 5. In the Coarse Green mode: � Center the Green Raster using the Green Centering Magnet. � Rotate the Green Deflection Yoke to correct any tilt. 6. In the Coarse Red mode, use the Red Centering Magnet to converge red on the green at the center of screen. Correct any red tilt with the Red Deflection Yoke. 7. In the Coarse Blue mode, repeat Step 6 using the Blue Centering magnet and the Blue Deflection Yoke. 8. Exit the Convergence mode. SD mode 1. 2. 3. 4. 5. Supply an NTSC Monoscope signal to a Video Input. Select the Monoscope as the signal source (Input button). Enter the Convergence Coarse Green mode. If needed, center the green raster using �1 HSTA� and �2 VSTA� adjustments. In the Coarse Red mode, use �1 HSTA� and �2 VSTA� adjustments to converge the red on the green at the center of the screen. 6. In the Coarse Blue mode, repeat step 5 to converge the blue of the green. 7. Exit the Convergence Mode
CONVERGENCE MODE Activate ��..MENU-0-3-5-9 Misc. ������.��"6" Coarse������..�."5" Fine ��������..."4" Color (R,G or B)��AUDIO Item No����.�..VIDEO Adjust/Move���.ADJUST Cursor Toggle�.�..ENTER Save & Exit�..MENU (twice)
Page 34
|
|
|
> |
|